Basic materials of plush toys
Share
1. Eyes: including plastic materials, crystal eyes, cartoon eyes and cloth eyes;
2. Nose: plastic nose, bag nose, flocked nose, matte nose, etc.
3. Cotton: It can be divided into 7D, 6D, 15D, A, B and C. We usually use 7D/A, and 6D is rarely used. Grade 15D/B or C shall be applied to low-grade products or products with very full and hard fortresses. 7D is smooth and elastic, while 15D is rough and hard.
According to the fiber length, it is divided into 64MM and 32MM cotton. The former is used for manual cotton washing, while the latter is used for machine cotton washing.
The general practice is to loose the cotton by entering the raw cotton. It is necessary to ensure that the cotton looser operates correctly and has enough cotton loosing times to make the cotton completely loose and achieve good elasticity. If the cotton loosening effect is not good, it will cause a great waste of cotton consumption.
4. Rubber particles: This is a popular filler now. First, the diameter should be no less than 3MM, and the particles should be smooth and even. Among them, toys in China are usually made of PE, which is environmentally friendly.
5. Plastic accessories: customize plastic accessories according to different toy models, such as eyes, nose, buttons, etc. Most of them are made of environmentally safe plastics, which are not harmful to children, but they should be careful not to fall off easily during sewing.
2. Nose: plastic nose, bag nose, flocked nose, matte nose, etc.
3. Cotton: It can be divided into 7D, 6D, 15D, A, B and C. We usually use 7D/A, and 6D is rarely used. Grade 15D/B or C shall be applied to low-grade products or products with very full and hard fortresses. 7D is smooth and elastic, while 15D is rough and hard.
According to the fiber length, it is divided into 64MM and 32MM cotton. The former is used for manual cotton washing, while the latter is used for machine cotton washing.
The general practice is to loose the cotton by entering the raw cotton. It is necessary to ensure that the cotton looser operates correctly and has enough cotton loosing times to make the cotton completely loose and achieve good elasticity. If the cotton loosening effect is not good, it will cause a great waste of cotton consumption.
4. Rubber particles: This is a popular filler now. First, the diameter should be no less than 3MM, and the particles should be smooth and even. Among them, toys in China are usually made of PE, which is environmentally friendly.
5. Plastic accessories: customize plastic accessories according to different toy models, such as eyes, nose, buttons, etc. Most of them are made of environmentally safe plastics, which are not harmful to children, but they should be careful not to fall off easily during sewing.